AMERICAN PRODUCTS |  VALVE STEM, BRASS  W/ 4656-10A | 51014311

OPTIMUS # 4656-10A PENTAIR / AM PROD # 51013811 GENERAL DESCRIPTION: THIS IS THE COMPLETE MAIN SHAFT WITH SPACERS, HANDLE, AND TOP CAP GENERAL INFO: THIS IS USED ON AMERICAN PRODUCTS / PENTAIR 2" PUSH PULL VALVE MATERIAL: SHAFT: BLACK PLASTIC SPACERS: BLACK PLASTIC TOP CAP: BLACK PLASTIC (INCLUDED WITH THIS ASSEMBLY) HANDLE: BLACK PLASTIC (INCLUDED WITH THIS ASSEMBLY) MOST OF THIS ASSEMBLY IS A SINGLE MOLDED PIECE DIMENSIONS: LENGTH: 17" (A) (NOT INCLUDING HANDLE) SHAFT DIAMETER: 1/2" (B) SPACERS: TOTAL # 2 SPACERS INCLUDED DIAMETER: 2" THICKNESS: 1/2" FROM OUTSIDE TO OUTSIDE GROOVE: 7/32" SPACING: (MEASURED ON CENTERLINE FROM FIRST SPACER WITH THE FIRST SPACER AT ZERO) 1ST 0 2ND 8"

SPACER OringS: (2) INCLUDED THESE ARE STRETCHED ON TO THE SPACERS SO THE DIMENSIONS SHOWN ARE FOR THE ORIGINAL OringS BEFORE THEY ARE STRETCHED OUTSIDE DIAMETER: 1-7/8" INSIDE DIAMETER: 1-1/2" HOLES IN SHAFT: (MEASURED ON CENTERLINE FROM THE HANDLE END OF THE SHAFT) HOLE: 1/8" AT 1-1/2" FROM END HOLE: 1/8" AT 7" FROM END ASSEMBLY INCLUDES: SHAFT WITH 2 SPACERS Oring FOR EACH SPACER (2 TOTAL) HANDLE TOP CAP AND TOP NUT MARKINGS: "P/N 510130" IS MOLDED INTO THE TOP NUT

TOP PLATE INFO INCLUDED? INCLUDED OPTIMUS # 4656-08A PENTAIR / AM PROD # 51012911 GENERAL DESCRIPTION: THIS IS THE TOP CAP ONLY USED ON THE AMERICAN PRODUCTS 2" PUSH PULL VALVE THIS DOES NOT INCLUDE THE TOP NUT MATERIAL: BLACK PLASTIC SHAPE: ROUND THIS IS HELD ON THE SHAFT WITH A PIN DIMENSIONS: OUTSIDE DIAMETER: 2" (A) TOTAL HEIGHT: 1-3/4" (B) CENTER HOLE DIAMETER: 1/2" INCLUDES: TOP PLATE ONLY MARKINGS: THERE ARE NO MARKINGS ON THIS

HANDLE INFO INCLUDED? INCLUDED OPTIMUS # 4656-01 PENTAIR / AM PROD # 51011800 GENERAL DESCRIPTION: THIS IS THE HANDLE USED IN THE AMERICAN PRODUCTS 2" PUSH PULL VALVE MATERIAL: BLACK PLASTIC SHAPE: T-STYLE THERE IS 1 HOLE IN THE BODY OF THE HANDLE DIMENSIONS: LENGTH: 4-1/2" (A) WIDTH: 1" HEIGHT: 1-1/2" (B) INCLUDES: HANDLE ONLY MARKINGS: THERE ARE NO MARKINGS ON THIS