THIS PRODUCT IS OBSOLETE AND NO LONGER MANUFACTURED BY GECKO ALLIANCE.

The recommended replacement Gecko Alliance Wet End 2.0Hp 56 Frame Xp2E 2" can be FOUND HERE and is also manufactured by Gecko Alliance.

The Gecko Alliance 91041632-000 Wet End is a commonly used wet end in the spa industry. It is a 6.3 wet end, meaning that it has a measurement of 4-1/8" between the top two thru-bolts. Wet ends are an essential component of spa pumps, responsible for drawing in water and pushing it through the pipes to create the desired pressure and flow. In addition to the measurement difference between 6.1 and 6.3 wet ends, there may also be variations in design and materials used. It is important to make sure the wet end being replaced is compatible with the pump and other components in the spa system. If a 6.1 wet end needs to be replaced, it is necessary to replace the entire pump as well to ensure the proper functioning of your spa and enjoy a relaxing and rejuvenating experience every time.

• Pump Model - Flo-Master XP2
• Motor Frame - 56 Frame Thru-Bolt
• Drain Plug Location - 4,6,9 o`clock
• Suction Style - Center
• Suction Pipe Size - 2" Male Buttress Thread (mbt)
• Discharge Style - Side Male Buttress Thread (mbt)
• Discharge Pipe Size - 2"
• Horsepower - 2.0hp
• Volute Fastening Type - 8 Screws

Fitment guidelines:
For use with Gecko Aqua Flo Flo-Master XP2

Additional information:
Alternate Part Numbers - 34-402-1122, 91041632, 5038-20, 91041920-000