ODYSSEY | END CAP | 526

THIS IS THE WHITE END CAP USED ON THE END OF THE TUBE USED ON THE ODYSSEY M600S2 SOLAR REEL BASIC SHAPE IS ROUND CYLINDER WITH A CLOSED END AND A WIDE TOP LIP ON THE OPEN END THE CLOSED END HAS A SMALL ROUND RAISED SECTION WITH A 1/8" HOLE IN THE CENTER THE OPEN END HAS A WIDE LIP. THERE IS HALF ROUND EXTENSION AT TOP OF THE LIP WHICH IS 1/2" TALL x 1" WIDE THERE IS A 1/4" HOLE THRU THIS EXTENDSION ************************************************ MATERIAL: WHITE PLASTIC ************************************************ DIMENSIONS: TOP LIP OUTSIDE DIAMETER: 4-5/8" (A) TOP LIP INSIDE DIAMETER: 3-3/16" THERE ARE 4 RAISED SECTIONS ON THE INSIDE SPACED EQUALLY AROUND IT 2 OF THESE FACING EXTEND 1/8" INSIDE 2 OF THESE EXTEND A LITTLE UNDER 1/16" BODY OUTSIDE DIAMETER: 3-5/8" BODY LENGTH: 4-1/4" (NOT INCLUDING THE HALF ROUND EXTENSION) THE BODY EXTENDS ABOUT 1/2" BEYOND THE CLOSED END PIECE THERE ARE 4 SLOTS IN THE BODY EQUALLY SPACED. THESE SLOTS ARE ABOUT 3/8" WIDE x 2" LONG AND ENDS OPPOSITE THE CLOSED SECTION ARE ROUNDED THE CLOSED END HAS A SMALL CIRCULAR EXTENSION 11-/16" IN DIAMTER THERE IS A 5/16" HOLE IN THIS EXTENSION