The Aqua-Flo Wet End 91041930-000 comes with a motor frame of 56 Frame Thru-Bolt, and has a suction style of center and suction pipe of 2" (mbt). The discharge style is side with a discharge pipe of 2" (mbt). The motor used may be either single or dual speed, and the wet end can be rotated at 90 degrees to change the discharge position. The wet end also includes a volute, seal, impeller, wear ring, suction cover, suction cover o-ring, drain plug, drain plug o-ring, and suction cover screws. The horsepower is 3.0hp, and the volute fastening type is 8 screws. Motor and unions must be purchased separately for installation of this wet end.

• Pump Model - Flo-Master XP2e
• Motor Frame - 56 Frame Thru-Bolt
• Drain Plug Location - 4,6,9 o`clock
• Suction Style - Center
• Suction Pipe - 2" Male Buttress Thread (mbt)
• Discharge Style - Side
• Discharge Pipe - 2" Male Buttress Thread (mbt)
• Horsepower - 3.0hp
• Volute Fastening Type - 8 Screws

Fitment guidelines:
For use with Flo-Master XP2e pump

Additional information:
Alternate Part Numbers - 34-402-1257, AQF-101-2216