The Gemini Plus Pump II Complete with an Air Switch, 0060F88C is a high-flow pump and the ideal choice for bath jet systems. Its 115V power and 1-1/2" diameter make it suitable for many applications. To adjust the speed, you must use the Titan Bath Control (not included). Unfortunately, low-profile pumps are not available for this model.

The Gemini Plus Pump II Complete is the perfect pump for a variety of applications. With its engineered seal design, it offers maximum reliability and versatility, allowing you to mount it either right or left with its centerline discharge. To make installation easy, it comes with a factory-installed cord with a NEMA plug. It is also UL Recognized and CSA certified, and its double-insulated motor housing makes it 100% self-draining. Additionally, the compact design of the pump results in quieter operation.

If the motor does not start when plugged in, make sure to check that the air switch is turned on. This can easily be done by flipping the switch and plugging it back in to see if the motor starts.

• 1.5 hp
• 1 Speed (1-Spd)
• Length - 12-11/16"
• Width - 5-11/16"
• Discharge Height - 7-3/4"
• Overall Height - 7-3/4"
• 115V motor voltage
• 12.5 motor amperage
• Suction Style - Bottom
• Suction Pipe Size - 1-1/2"
• Discharge Style - Center
• Discharge Pipe Size - 1-1/2"
• Drain Plug Location - None
• Pump Model - Gemini Plus II
• Suction Connection Type - Male Buttress Thread (mbt)
• Discharge Connection Type - Male Buttress Thread (mbt)

Fitment guidelines:
For high flow bath jet systems

Additional Information:
Alternate part numbers - NR4A-C (HydroAir), HA0060F88C, 1-00-0221, and 34-109-1040