The Jacuzzi® HB21000 is a bath pump designed for use with the Jacuzzi J-Series Pump Model. This single-speed pump features an air switch, a motor voltage of 115v, and a motor amperage/wattage of 7.5A. The suction pipe size is 1-1/2" and the discharge pipe size is also 1-1/2". The discharge connection type is male jacuzzi thread (MJT) while the suction connection type is also MJT.

This pump is equipped with an air switch. If the motor on your pump does not start up when plugged in, check to see if the air switch is set to 'Off'. If that is the case, turn it to the 'On' position and try again. Make sure that all other connections are properly secured before turning the switch back on.

• Speed 1 Speed (1-Spd)
• Motor Voltage - 115v
• Bottom Suction Style
• Suction Pipe Size - 1-1/2"
• Center Discharge Style
• Discharge Pipe Size - 1-1/2"
• Motor Amperage/Wattage - 7.5A
• Discharge Connection Type - Male Jacuzzi Thread (mjt)
• Suction Connection Type - Male Jacuzzi Thread (mjt)

Fitment guidelines:
For use with Jacuzzi J-Series Pump Model

Additional Information:
Alternate part numbers - 1-00-0127, 1-00-0127A, 1-00-0127PK, 21000, 9249000, K41GWAAB-1001