Pentair Lid, Clear Plastic For 700 | 353525

PENTAIR | LID, CLEAR PLASTIC FOR 700 | 353525

OPTIMUS # 5000-3525
PENTAIR # 353525

GENERAL DESCRIPTION:
THIS IS AN OVAL SHAPED, CLEAR PUMP LID USED ON THE PAC FAB / PENTAIR
RPF 700 HYDROPUMP

SPECIAL NOTE: THIS IS SIMILAR TO THE 353625 USED ON THE RPA 590
BUT THIS LID IS LARGER. THE RPA 590 LID IS ONLY 7" LONG

*******************************************************************************
SPECS:

SHAPE: OVAL

THIS IS FLAT AROUND THE EDGES AND ENDS AND IS DOMED IN THE CENTER
THERE IS A 3/8" DIAMETER HOLE NEAR EACH END FOR THE HAND KNOBS
ON THE UNDERSIDE THERE IS A CIRCULAR BRACE IN THE CENTER
AND 5 STAIGHT BRACES UNDER THE DOMED AREA

THE DOMED AREA IS ABOUT 5-5/8" IN DIAMETER

MATERIAL:
CLEAR PLASTIC

MOUNTING STYLE: HELD BY A HAND KNOB AT EACH END

LENGTH: 7-7/8" (A)

WIDTH: 6-1/2"

HEIGHT: 1-5/8" (B)

THERE IS A 1/2" LONG FLAT AT EACH END

BOLT HOLES: 3/8" DIAMETER, ONE AT EACH END
THESE ARE 6-7/8" APART AT THE CENTER OF THE HOLE

*******************************************************************************
MARKINGS:

35-3525 IS MOLDED INTO THE LID AND VISIBLE FROM ABOVE