Splash Pak 10-1462-07-R Eye Seal 3/4 - 1-1/2 HP

GENERAL DESCRIPTION:
THIS IS A ROUND EYE SEAL. THIS FITS OVER THE INLET OF THE Impeller.

*******************************************************************************
SPECS:

SHAPE: ROUND

THIS IS A DOUBLE STEPPED EYE SEAL.
THE INSIDE IS THE SAME DIAMETER ALL THE WAY THROUGH.
THE OUTSIDE IS LARGER AT THE FRONT OF THE EYESEAL AND STEPS DOWN.
WHEN INSTALLED, THE LARGER END SHOULD FACE AWAY FROM THE Impeller.

MATERIAL:
BEIGE, RUBBER LIKE FLEXIBLE PLASTIC

OUTSIDE DIAMETER: 2-1/2" (A) (LARGER SIDE)
OUTSIDE DIAMETER: 2-5/16" (A) (SMALLER SIDE) 

FRONT TO BACK: 3/8" (B)
THIS IS 2-1/2" DIAMETER FOR 1/8" OF THE FRONT TO BACK DISTANCE
AND 2-5/16"FOR THE REMAINING 1/4"

INSIDE DIAMETER: 2"

*******************************************************************************
MARKINGS:
THERE ARE NO MARKINGS