Waterway Plastics Pump,WW Viper,4.0hp,230v,1-Spd,56fr,2-1/2" x 2-1/2",OEM | 3711621-1V

Waterway 3711621-1V is a Single Speed Pump powered by 230 volts with 12.0A motor amperage and 4.0hp horsepower. This pump has a Viper model with 2-1/2" suction pipe size and Male Buttress Thread (mbt) connection type. Additionally, the center of the suction is accompanied by a 2-1/2" discharge pipe size with Male Buttress Thread (mbt) connection type on its side. The motor is 56 Frame Thru-Bolt and has a drain plug located at 3,4,6,9 o`clock.

This pump also features a unique wet-end design specifically for 56-frame motors that includes two double-shielded ball bearings with moisture-resistant grease for quieter operation and longer life. Furthermore, the engine has four sets of insulated windings for increased efficiency. This pump is thermally protected to extend the life of the motor and it is highly versatile as it can be rotated every 90 degrees. The dimensions (H x W x L) of this pump are 9.08" x 8.05" x 15.72".

• Quiet operation
• 2-1/2" intake and discharge size
• Unique and innovative wet-end design
• Two-speed motors have four sets of insulated windings
• Thermally protected to extend the life of the motor
• Split capacitor, (start and run) for less energy consumption
• Highly versatile wet end can be rotated every 90 degrees
• Has Two double-shielded ball bearings with moisture resistant grease

Additional Information:
Alternate part numbers - 34-270-3500, 317084, K63MWENE-4731