Pentair Heat Exchanger With Heads Model 200 | 472168

PENTAIR | Heat Exchanger With Heads Model 200 | 472168

MILLIVOLT MODELS 150M | 200M | 250M | 300M | 350M | 400M

GENERAL DESCRIPTION: THIS IS THE COMPLETE HEAT EXCHANGER WITH FRONT AND REAR HEADERS USED IN THE MINI MAX CH 200 THIS INCLUDES THE TUBE BUNDLE AND BOTH HEADERS PRE-ASSEMBLED NUMBER OF TUBES: 9 THESE ARE STAGGERED WITH 5 ON BOTTOM AND 4 ON TOP TOTAL LENGTH- 25-1/2" APPROXIMATELY (FROM OUTSIDE TO OUTSIDE OF HEADERS) TOTAL HEIGHT: 8" APPROXIMATELY (THIS IS THE HEIGHT OF THE FRONT HEADER) LENGTH - TUBE BUNDLE ONLY: 15" (LENGTH FROM OUTSIDE OF ENDPLATE TO OUTSIDE OF ENDPLATE) HEIGHT- TUBE BUNDLE ONLY): 3" (END PLATE HEIGHT) WIDTH: 14-5/8" (MEASURED ON THE ENDPLATE - BASICALLY THIS IS HOW LONG THE ENDPLATE IS) MARKINGS: NO MARKINGS ITEMS INCLUDED WITH THE TUBE BUNDLE THESE ITEMS ARE ALREADY ASSEMBLED (1) COMPLETE SET OF HEADER GASKETS (18 TOTAL) (1) COMPLETE SET OF EXCHANGER BOLTS AND WASHERS (16 TOTAL) (1) PLASTIC REAR HEADER (1) PLASTIC FRONT HEADER (INCLUDES COMPLETE FLOW VALVE AND HEADER CAPS) (1) WATER PRESSURE SWITCH (1) 115 DEGREE HIGH LIMIT (1) 150 DEGREE HIGH LIMIT (1) THERMISTER PROBE THE HEAT EXCHANGER BAFFLES AND FRONT CONNECTOR FITTINGS ARE NOT INCLUDED WITH THIS ASSEMBLY